LockNLube

BACKORDERED UNTIL MID JUNE 2026 Small size fits easily into toolbox or storage compartment. Develops 3,500 PSI. Uses 3 oz. grease cartridges (sold ...

Similar to our best-selling LNL65107 but with a 20° angled head! 20° angled head for optimal positioning on inner and outer dual wheel rims. Extend...

Easy-priming, high-pressure, and European engineered, the LockNLube Easy-Prime Pistol Grip Grease Gun will change your idea of what a grease gun ca...

Our traditional and best-selling 1/8" NPT swivel fits almost every manual grease gun. The 7/16" swivels are engineered to match the threads and spe...

No more pressure locks! Returns grease to the tube. No more messy disconnects. The LockNLube Pressure Return Valve (PRV) allows grease to flow from...

Two-jaw locking design with a patented remote actuator. Extended reach to securely inflate duals. Easily disconnect with the actuator. No need to r...

The Grease Gun Barrel Cap, a.k.a. The Grease Gundom, is a perfect addition to any grease gun.   Compatible with any standard 14 oz. grease gun (ma...

BACKORDERED UNTIL MID JUNE 2026 Universal Bearing Packer with threaded center post for use with grease guns. The design incorporates a standard gre...

End greasing frustration with the LockNLube® Grease Coupler—the ultimate solution for leak-free greasing. Compatible with all grease guns and greas...

Extra reach for hard-to-reach grease fittings. Snaps directly onto a jaw-type coupler to reach grease fittings in very tight spaces. Works best wi...

No more pressure locks! Returns grease to the tube. No more messy disconnects. The LockNLube Pressure Return Valve (PRV) allows grease to flow from...

The LockNLube Premium Pistol Grip Grease Gun delivers up to 8,000 PSI. A cast aluminum head combines extreme durability and lightweight constructio...

The LNL153 is a heavy-duty grease gun that gets the job done! We are excited to announce that our best-selling GREEN LNL153 grease gun is now avail...

Precision-machined tire inflator adapter that easily connects the LockNFlate® Air Chuck to any inflator or pump with a screw-on, or other, female ...

The LNL65103 dual head, angled wheel adapter works as an "open" air chuck until one side or the other engages the tire valve. Meaning, that if you ...

LOCKS ON. STAYS ON. WON'T LEAK. Easy To Use: With the LockNFlate® Air Chuck, achieving the perfect tire pressure has never been easier. Its unique ...

Available individually or save 17% with a 3-pack! Easily replace the seal and steel jaws on your LockNLube® Grease Coupler. Each Rebuild Kit includ...

The LockNLube® Grease Coupler XL, just like the shorter original, is compatible with all grease guns and grease fittings. It does not leak once loc...

1/8" NPT Straight, 10-PACK.

5/16"-24 UNF-2A, 10-PACK.

10mm Str, 10-PACK.

6mm 90 deg, 10-PACK.

6mm Str, 10-PACK.

8mm 90 deg, 10-PACK.

8mm Str, 10-PACK.

90 Degree Zerk Fitting - 1/4-28 Taper, 10-PACK.

Straight Drive Fitting - 1/4" Drill, 10-PACK.

45 Degree Zerk Fitting 1/8 NPT, 10-PACK.

Straight Zerk Fitting - 1/4"-28 Taper, 10-PACK.

45 Degree Zerk Fitting - 1/4-28 taper, 10-PACK.

1/4"-18 NPT 67.5 Degree Zerk Fitting, 5-PACK. (NOTE package labeling is a misprint, this is a 1/4"-18 NPT 67.5 Degree Zerk Fitting)

1/4"-18 NPT Grease Fittings, 5-PACK. (NOTE current package is a misprint, this is a 1/4"-18 NPT Grease Fitting)

90 Degree Zerk Fitting 1/8 NPT, 10-PACK.

30 Degree Zerk Fitting 1/8 NPT, 10-PACK.

The Colby Valve XL Emergency Valve was designed to replace broken valves stems on 5/8" (.625) wheel openings. These are the larger wheel openings f...

Want the best valve stem on the market? The Ultimate Valve System is it! It is a full 1/2" shorter than the Emergency and Permanent Valves, lowerin...

The Colby Valve Permanent Tire Valve System is designed to replace broken valves stems on all .453" wheel openings. These are the smaller wheel ope...

Colby Valve Emergency Valves offer a tool-free installation from the outside of the wheel, in about 1 minute. These are .453 size, and will fit alm...

Quickly change the spray angle on your pressure washer wand!  THE WAND WIZARD IS PERFECT FOR: Engines, farm tractors and farm implements. Semi-tru...

Quickly change the spray angle on your pressure washer wand!  THE WAND WIZARD IS PERFECT FOR: Engines, farm tractors and farm implements. Semi-tru...

Jake's Wire Tighteners are a reusable, effective, and easy solution for tightening wire. These heavy-duty clips work on wire up to 5/16" diameter (...

Jake's Wire Tighteners are a reusable, effective, and easy solution for tightening wire. These clips work on 1/4" diameter wire (see the heavy dut...

Made in the USA from heavy gauge 14.5 galvanized steel wire. For attaching non-electrified wire to T-Posts. Fit standard size 1.25 and 1.33 lb. st...

Made in the USA. Made of 100% Steel with a Comfort Rubber Grip. NEW - Black oxide coating prevents rust.Bright Yellow handle for greater visibilit...

A high-quality grease gun whip hose with a working pressure of 6,000 PSI and a burst pressure of over 14,000 PSI. Both ends are male 1/8” NPT. Hig...

Twin spring guards prevent kinks and cracks and ensures safety with cordless grease guns. A heavy-duty hose with 28,000 PSI burst pressure yet stil...

Our traditional and best-selling 1/8" NPT swivel fits almost every manual grease gun. The 7/16" swivels are engineered to match the threads and spe...

Our traditional and best-selling 1/8" NPT swivel fits almost every manual grease gun. The 7/16" swivels are engineered to match the threads and spe...