LockNLube

Quickly change the spray angle on your pressure washer wand!  THE WAND WIZARD IS PERFECT FOR: Engines, farm tractors and farm implements. Semi-tru...

Our traditional and best-selling 1/8" NPT swivel fits almost every manual grease gun. The 7/16" swivels are engineered to match the threads and spe...

Single-shot and continuous delivery modes in one grease gun! Easily switch delivery mode with sliding selection lever. Heavy-duty and durable die-...

Our precision-machined injection grease gun builds up to 2,000 PSI; won't leak from the push button; and can be used to grease Zerk fittings, slide...

Twin spring guards prevent kinks and cracks and ensures safety with cordless grease guns. A heavy-duty hose with 28,000 PSI burst pressure yet stil...

Eight quick-connect adapters allow access to hard-to-reach grease fittings. INCLUDES: Simple 90° Adapter. Push-On 90° Adapter. 90° Grease Coupler ...

90° adapter for hard-to-reach grease fittings with three hardened steel jaws and a rubber seal. Quickly connect to your LockNLube® Grease Coupler, ...

Made in the USA. Made of 100% Steel with a Comfort Rubber Grip. NEW - Black oxide coating prevents rust.Bright Yellow handle for greater visibilit...

Our traditional and best-selling 1/8" NPT swivel fits almost every manual grease gun. The 7/16" swivels are engineered to match the threads and spe...

Colby Valve Emergency Valves offer a tool-free installation from the outside of the wheel, in about 1 minute. These are .453 size, and will fit alm...

The Colby Valve Permanent Tire Valve System is designed to replace broken valves stems on all .453" wheel openings. These are the smaller wheel ope...

Want the best valve stem on the market? The Ultimate Valve System is it! It is a full 1/2" shorter than the Emergency and Permanent Valves, lowerin...

The Colby Valve XL Emergency Valve was designed to replace broken valves stems on 5/8" (.625) wheel openings. These are the larger wheel openings f...

Includes most common SAE and metric grease fittings, two multi-tools, and 20 plastic caps to keep grease fittings clean and help them last longer. ...

Rugged aluminum die-cast head. Steel barrel in premium powder-coated finish with heavy-duty rubber plunger. ‘V’ type drop-resistant plunger handle...

Easy-priming, high-pressure, and European engineered, the LockNLube Easy-Prime Pistol Grip Grease Gun will change your idea of what a grease gun ca...

Our traditional and best-selling 1/8" NPT swivel fits almost every manual grease gun. The 7/16" swivels are engineered to match the threads and spe...

The ultimate in industrial greasing strength – foot-operated, over two-gallon capacity, 10,000 PSI output, patented pressure return valve that elim...

Made in the USA from heavy gauge 14.5 galvanized steel wire. For attaching non-electrified wire to T-Posts. Fit standard size 1.25 and 1.33 lb. st...

Open up clogged grease fittings with the Original Grease Buster®. Fill with a solvent and tap the piston with a hammer. Uses hydraulic pressure to ...

The 5" Hose Extension replaces the installed Grease Buster® coupler to make it easier to reach clogged fittings in tight spaces. Includes a heavy-d...

Our pneumatic piston replaces the included Grease Buster® piston to take advantage of the added force and vibration of an air hammer. Double O-ring...

Available individually or save 17% with a 3-pack! Easily replace the seal and steel jaws on your LockNLube® Grease Coupler. Each Rebuild Kit includ...

Fits all standard grease fittings (SAE & Metric). Integrated collar slides onto the fitting, keeping the cap safely attached.

Easily install and extract grease fittings. Fits 1/8" NPT, BSPT, M10x1 and other fittings with hex size 3/8" (9mm) and 7/16" (11mm).

Easily install and extract grease fittings. Fits 1/4"-28, M6x1, M8x1 and other fittings with hex size 5/16" (7mm) and 3/8" (9mm).

This aluminum thread tester helps you easily identify thread patterns. Easily identify thread patterns for all common standard and metric grease...

1/4"-18 NPT 67.5 Degree Zerk Fitting, 5-PACK. (NOTE package labeling is a misprint, this is a 1/4"-18 NPT 67.5 Degree Zerk Fitting)

Straight Drive Fitting - 1/4" Drill, 10-PACK.

1/4"-18 NPT Grease Fittings, 5-PACK. (NOTE current package is a misprint, this is a 1/4"-18 NPT Grease Fitting)

45 Degree Zerk Fitting - 1/4-28 taper, 10-PACK.

90 Degree Zerk Fitting - 1/4-28 Taper, 10-PACK.

Straight Zerk Fitting - 1/4"-28 Taper, 10-PACK.

30 Degree Zerk Fitting 1/8 NPT, 10-PACK.

45 Degree Zerk Fitting 1/8 NPT, 10-PACK.

90 Degree Zerk Fitting 1/8 NPT, 10-PACK.

1/8" NPT Straight, 10-PACK.

10mm Str, 10-PACK.

5/16"-24 UNF-2A, 10-PACK.

6mm 90 deg, 10-PACK.

6mm Str, 10-PACK.

8mm 90 deg, 10-PACK.

8mm Str, 10-PACK.

The most common metric taper grease fittings. 80 FITTINGS TOTAL: M6 x 1 Straight, Qty = 20 M6 x 1 90° Angle, Qty = 10 M10 x 1 Straight, Qty = 15 M...

The most common 1/8" NPT and 1/4"-28 taper fittings. 80 FITTINGS TOTAL: 1/8" - 27 Straight, Qty = 25 1/4" - 28 Straight, Qty = 15 1/4" - 28 45° An...

Tired of misplacing your adapters when greasing? Tired of looking for a tool to clear away dirt and gunk from your zerks before you grease? We've g...

The Grease Gun Barrel Cap, a.k.a. The Grease Gundom, is a perfect addition to any grease gun.   Compatible with any standard 14 oz. grease gun (ma...

End greasing frustration with the LockNLube® Grease Coupler—the ultimate solution for leak-free greasing. Compatible with all grease guns and greas...