Festool

For Festool cordless drills with CENTROTEC interface (for use in the WH-CE CENTROTEC tool chuck). Centrotec Pilotless Countersink, D5-15mm. Prec...

For the DOMINO DF 500. The new DOMINO connectors make knock-down joinery simple and stable. Quickly and easily assemble, separate, and reassemble ...

The cover for efficient dust extraction. The cover serves two purposes. It creates a tight seal on the housing side of the circular saw for more ef...

For D 27/D 36. For CT SYS & CTC SYS. For CT 15. Length 6” (150 mm). Accepts D 27 mm and D 36 mm hoses and tubes. Included with CT SYS. Plastic...

For D 27/D 36. Plastic, length 11-13/16" (300 mm). High-quality and durable crevice nozzle.

For DF 700. 32 Cross Anchors including screws for locking Anchors or Double Bolts. Break through the limits of shop-built pieces and on-site const...

For MFT 3. MFT Cross Members can be used to reinforce the MFT Multifunction Table, particularly when it is used for intensive applications where s...

For DF 500 and DF 700. For repeat hole spacing between 3-7/8" and 8-1/16" (100mm and 205mm). The DOMINO Cross Stop enables precise and repeatable m...

For KS 120, KS 88, KS 60, KSC 60. Improved for 2019, expanding the versatility of the Kapex sliding compound miter saw and UG extensions, the Crow...

For KS 120. Expanding the versatility of the KAPEX sliding compound miter saw, the Crown Stop with Base Extension supports nested workpieces at any...

For CT mobile dust extractors & D 27 suction hose. Utilizing suction from a CT Dust Extractor, the CT Wings provide an additional support for m...

For CT 26/36/48. For craftsmen who work with large volumes of dust and debris, the CT CYCLONE pre-separator is the simplest answer for increasing ...

For OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200. Flush trim bit, HW, D19/20 WM Z2K2, shank dia. .31" (8mm). With reversible ...

For OF 1010, OF 1010 R, OFK 700, MFK 700. Flush trim cutter with ball bearing for edge trimming. Featuring robust 8mm shank. 12x12mm reversible bl...

For FS/2. Simple to attach without tools. Safe working. Prevents suction hoses and cables from catching on the end of the guide rail.

With cord For the accurate removal of trapped particles and unevenness Manufactured from carbide With hollow grinding Technical Details: Dimensio...

Make precise plunge cuts—at any depth. This positioning aid shows the exact entry and exit points of the blade, so you can hit your marks and avoid...

Make precise plunge cuts—at any depth. This positioning aid shows the exact entry and exit points of the blade, so you can hit your marks and avoid...

For all Festool cordless drills with CENTROTEC interface. For use with Depth Stop Attachment 769126. Equipped with 1/4" hex shank and 8 mm socket ...

For TPC 18/4, TDC 18/4, C18, T18 and CXS/TXS 18 with FastFix support. Switch between drill and driving functions in seconds with the FastFix inter...

For OSC 18. Enables plunge cuts with a defined depth. Contains two inserts: A rotating depth stop for plunge cuts and a sliding shoe for long, str...

For OS 400. Includes Plunge Base (500 161) and Depth-Stop (500 160) with adapter. Depth-Stop - Utilizing the quick, tool-free mounting adapter,...

Key Benefits Easy disc change in just a few steps Fast grinding of abrasive substrates First-class materials and the segment height ensure a long s...

For RG 130 ECI, RG 130. The DIA ABRASIVE grinding disc with a diameter of 130 mm is well suited to abrasive materials on smaller surfaces containi...

Key Benefits Easy disc change in just a few steps Fast grinding of very hard substrates First-class materials and the segment height ensure a long ...

For RG 130 ECI, RG 130. The DIA Hard-D130-ST grinding disc for the RG 130 with a diamond segment height of 3/16" (5 mm) is suited to smaller surfa...

For RG 130 ECI, RG 130. The DIA Paint diamond disc was specially developed for painters. It is the ideal solution for removing stubborn layers of ...

The best results when processing very hard substrates. The DIA Stone Premium D130 grinding disc for the RG 130 with a diamond segment height of 9/3...

Key Benefits Sands with thermoelastic coatings – no clogging of the disc, no adherence Long service life thanks to extremely high-quality and tempe...

UNBELIEVABLE POWER. FOR NEARLY EVERY SUBSTRATE. Perfect substrate preparation is the prerequisite for a perfect result. The RENOFIX RG 130 ECI su...

For TS 55 F and TSC 55 K. Festool's diamond saw blade saws all cement-bonded and gypsum-bonded chipboard and fibreboard quickly and with a high cu...

For TS 55 REQ, TSC 55 REB. Festool's diamond saw blade cuts all fiber-cement materials quickly and with superior performance. It is the ideal solu...

For TS 60 K, TSV 60 K. Festool's diamond saw blade saws all cement-bonded and gypsum-bonded chipboard and fiberboard quickly and with a high cutti...

Built for the toughest materials. Built for extreme durability and precision in the toughest cutting conditions, this diamond-tipped circular saw b...

Built for the toughest materials. Built for extreme durability and precision in the toughest cutting conditions, this diamond-tipped circular saw b...

For OSC 18. Diamond saw blade with a diameter of 90 mm. Extremely durable and robust thanks to premium-quality diamond coating. Suitable for sever...

For CT 36 AC. Sanding drywall creates a lot of dust. These open-face, disposable collection liners provide an easy and convenient means to dispose ...

For CT 48 AC. For extracting dust with the CT 48 with AutoClean function. Not suitable for CT standard version (without AC).

For CT-VA. Disposable dust liners for the CT CYCLONE container bins. Ideal for containing and disposing dust without quick access to a dumpster. F...

For DF 700. Festool Beech Tenons are made from all-natural, solid hardwood for strength and stability. The Beech Tenon serves as a true floating t...

For DF 700. Festool Beech Tenons are made from all-natural, solid hardwood for strength and stability. The Beech Tenon serves as a true floating t...

For the DOMINO DF 500. The new DOMINO connectors make knock-down joinery simple and stable. Quickly and easily assemble, separate, and reassemble ...

32 Anchor Bolts SV-AB D14, 16 Connector Double Bolts SV-DB D14, 128 Half-Shells for the Anchor Bolts and Connector Double Bolts, 32 Expansion Anc...

For the DOMINO DF 500. Durable, carbide-tipped cutters quickly and precisely carve out clean and consistently sized mortises, ensuring a perfect f...

For DF 700. 10mm cutter for the DOMINO XL DF 700 Joiner for use with 10mm tenons. Durable, carbide-tipped cutters quickly and precisely carve out ...

For DF 700. 12mm cutter for the DOMINO XL DF 700 Joiner for use with 12mm tenons. Durable, carbide-tipped cutters quickly and precisely carve out ...

For the DOMINO DF 500. Durable, carbide-tipped cutters quickly and precisely carve out clean and consistently sized mortises, ensuring a perfect f...

For the DOMINO DF 500. Durable, carbide-tipped cutters quickly and precisely carve out clean and consistently sized mortises, ensuring a perfect f...