Power Tools

For DF 700. 16 double-headed bolts for flat connections, including 64 Half-Shells. The double-headed bolts can be clipped using 2 Half-Shells or (...

For DF 700. 32 Cross Anchors including screws for locking Anchors or Double Bolts. Break through the limits of shop-built pieces and on-site const...

For DF 700. 32 Anchor Bolts for corner connections, including 64 Half-Shells. Break through the limits of shop-built pieces and on-site constructi...

32 Anchor Bolts SV-AB D14, 16 Connector Double Bolts SV-DB D14, 128 Half-Shells for the Anchor Bolts and Connector Double Bolts, 32 Expansion Anc...

For the DOMINO DF 500. The new DOMINO connectors make knock-down joinery simple and stable. Quickly and easily assemble, separate, and reassemble ...

For the DOMINO DF 500. The new DOMINO connectors make knock-down joinery simple and stable. Quickly and easily assemble, separate, and reassemble ...

For the DOMINO DF 500. The new DOMINO connectors make knock-down joinery simple and stable. Quickly and easily assemble, separate, and reassemble ...

For the DOMINO DF 500. The new DOMINO connectors make knock-down joinery simple and stable. Quickly and easily assemble, separate, and reassemble ...

For the DOMINO DF 500. The new DOMINO connectors make knock-down joinery simple and stable. Quickly and easily assemble, separate, and reassemble ...

For the DOMINO DF 500. The new DOMINO connectors make knock-down joinery simple and stable. Quickly and easily assemble, separate, and reassemble ...

For the DOMINO DF 500. The new DOMINO connectors make knock-down joinery simple and stable. Quickly and easily assemble, separate, and reassemble ...

For TS 55, TS 55 R, TS 55 F, TS 60 K, TS75, TSC 55, TSC 55 K, HK 55, HKC 55. Affixing to the rib, or guide on top of the Festool FS Guide Rail, th...

For PS 300, PSB 300, PS(C) 420, PSB(C) 420. Solid one-piece, transparent splinter guard for Festool jigsaws. With the first cut, the splinter guar...

For PS 300, PSB 300, PS(C) 420, PSB(C) 420. Solid one-piece, transparent splinter guard for Festool jigsaws. With the first cut, the splinter guar...

For PS 420. With a wide range of time-saving, quality improving, task-specific bases, you’ll do more with a jigsaw than you ever thought possible....

For PS(C) 420, PSB(C) 420. This base can be used to adapt your CARVEX jigsaw to a Festool guide rail to get extremely straight cuts. When used wit...

A great all around sander, the DTS 400 is designed for fine sanding small, angular surfaces that are difficult to reach. With a short 5/64" (2 mm...

Effortlessly transition from corded to cordless without compromising performance. Balanced with a unique ergonomic battery for optimum performanc...

Effortlessly transition from corded to cordless without compromising performance. Balanced with a unique ergonomic battery for optimum performanc...

Effortlessly transition from corded to cordless without compromising performance. Balanced with a unique ergonomic battery for optimum performanc...

The OF 2200 is our most powerful router. It can easily plunge into 8/4 hard maple and make a 1/2" groove in a single pass. With 2200 watts of powe...

The new KAPEX KSC 60 cordless sliding compound mitre saws produce unbeatably precise cross cuts – in an enormous range of applications with miter...

The new KAPEX KSC 60 cordless sliding compound mitre saws produce unbeatably precise cross cuts – in an enormous range of applications with miter...

Experience the incredible power of the TS 75 plunge cut saw. No other saw comes close to its power and pinpoint accuracy. Capable of cutting mate...

Enjoy the freedom and convenience of cordless dust extraction. The new CTC MIDI is our largest and most powerful cordless dust extractor yet – fe...

For KS 120. Consisting of KA-UG-L and KA-UG-R.

For KS 120. Two folding extensions (left and right) with tool-free connection to the KAPEX. Provides stock support with integrated flip stop, meas...

For KS 120. Folding extension with tool-free connection to the KAPEX UG mobile miter station. Provides stock support with integrated flip stop, me...

For KS 120. Folding extension with tool-free connection to the KAPEX UG mobile miter station. Provides stock support with integrated flip stop, me...

For KS 120, KS 88, KS 60, KSC 60. Improved for 2019, expanding the versatility of the Kapex sliding compound miter saw and UG extensions, the Crow...

For KS 120, KS 88, KS 60, KSC 60. Use the Clamping Kit to secure the KAPEX sliding compound miter saw to the Festool Multifunction Table. Hex bolt...

For TS 75. Parallel Edge Guide enables guided, parallel cutting with the TS 75 Plunge Cut Saw. Can be used for parallel rip cutting with the TS sa...

For TSC 55, TSC 55 K, HKC 55. Keep the workspace clean by virtually collecting all dust with the SB-TSC Dust Bag. When not in use, the bag folds do...

For TS 55 R, TS 55 F, TSC 55, TSC 55 K. Achieve splinter free cuts on both sides of the blade by using the off-cut side splinter guard in conjuncti...

For PLANEX LHS 2 225 EQ(I).Not suitable for PLANEX LHS 225 EQ and not suitable for PLANEX LHS-E 225 EQ. For creating a perfect and scratch-free su...

The heart of the ergonomic MX 1200 mixer, the ErgoFix Adapter attaches to stirring rods with M14 thread to provide a quick, tool-free mount to th...

For AP-KA 65, MFT GP-KA 65 MFT/3. Guide Plates for KA 65 Table Insert (500 366). Provides low friction surface area for stationary edge banding ap...

For KA 65. Provides a work surface when coupled with Adapter Plate (500 175) for stationary edge banding applications. Requires Festool MFT/3 Table...

For hand sanding block HSK 80 x 133. Polishing Felt 80x133mm 5 pack, KA65. In conjunction with the MPA 5010 polishing agent. For polishing hig...

Spherical head can be rotated 360°. For flexible positioning of the working light SYSLITE KAL and KAL II.

For SYSLITE STL 450 Inspection Light. Optional mounting hardware for ST DUO 200 Tripod stand. Provides hands-free operation and multiple angle op...

For the ST DUO 200 tripod, STL 450 surface control light and AD-ST DUO 200 adapter. Designed for the ST DUO 200 tripod, the ST Tripod Bag provide...

For KS 120. Expanding the versatility of the KAPEX sliding compound miter saw, the Crown Stop with Base Extension supports nested workpieces at any...

For KS 60, KSC 60, KS 120. Bevel for transferring angles to the circular cross-cut saw. For interior and exterior angles. Dissecting angle is gene...

For the DOMINO DF 500. Durable, carbide-tipped cutters quickly and precisely carve out clean and consistently sized mortises, ensuring a perfect f...

For the DOMINO DF 500. Durable, carbide-tipped cutters quickly and precisely carve out clean and consistently sized mortises, ensuring a perfect f...

For the DOMINO DF 500. Durable, carbide-tipped cutters quickly and precisely carve out clean and consistently sized mortises, ensuring a perfect f...