Klein Tools
Filters
- Awls (0)
- Bolt Cutters (0)
- Cable & Wire Pulling (0)
- Chisels (0)
- Conduit Benders (0)
- Fastening Tools (0)
- Hammers (0)
- Hand Saws (0)
- Hex Keys (0)
- Knives (0)
- Levels (0)
- Magnetic Pick Up Tools (0)
- Marking & Layout Tools (0)
- Measuring Tools (0)
- Multi-Tools (0)
- Nut Drivers & Screwdrivers (0)
- Pins (0)
- Pipe & Tubing Cutters (0)
- Pliers (0)
- Punchdown Tools (0)
- Ratchets (0)
- Rebar Benders (0)
- Scissors (0)
- Sharpeners (0)
- Sockets (0)
- Wire Crimping, Cutting, & Stripping (0)
- Wrecking Bars (0)
- Wrenches (0)
KLEIN TOOLS 3/4" X 4" Knockout Draw Stud
Klein ToolsDesigned for optimal set-up and slug removal speed. For use in hydraulic drivers, punch and die are required for operation. Draw stud's flat end de...
View full detailsKLEIN TOOLS 3/8" X 2-5/8" Knockout Draw Stud
Klein ToolsFor use in hydraulic drivers. Punch and die are required for operation. Draw stud's flat end designed to guide punch for faster thread engagement. ...
View full detailsKLEIN TOOLS 2.416" Knockout Punch For 2" Conduit
Klein ToolsThe 2.416-Inch Knockout Punch easily punches holes for 2-Inch conduit. It offers an optimized design that reduces wrench effort. Slugs are split in...
View full detailsKLEIN TOOLS 1.951" Knockout Punch For 1-1/2" Conduit
Klein ToolsEasily punch holes for1-1/2-Inch EMT conduit. Has a maximum capacity of 10 gauge mild steel. Cuts aluminum, fiberglass and plastic as well. Optimiz...
View full detailsKLEIN TOOLS 1.701" Knockout Punch For 1-1/4" Conduit
Klein ToolsEasily punch holes for 1-1/4-Inch EMT conduit. Has a maximum capacity of 10 gauge mild steel. The optimized design reduces wrench effort. Slugs are...
View full detailsKLEIN TOOLS 1.362" Knockout Punch For 1" Conduit
Klein ToolsEasily punch holes for 1-Inch EMT conduit. Has a maximum capacity of 10 gauge mild steel. Cuts aluminum, fiberglass and plastic. The optimized desi...
View full detailsKLEIN TOOLS 1.115" Knockout Punch For 3/4" Conduit
Klein ToolsEasily punch holes for 3/4-Inch EMT conduit. Has a maximum capacity of 10 gauge mild steel. Cuts aluminum, fiberglass and plastic. The optimized de...
View full detailsKLEIN TOOLS 0.875" Knockout Punch For 1/2" Conduit
Klein ToolsThe 7/8-Inch Knockout Punch easily punches holes for 1/2-Inch EMT conduit. The optimized design reduces wrench effort. Slugs are split inside for e...
View full detailsKLEIN TOOLS Knockout Punch Set w/ Wrench
Klein ToolsSet includes 1'' (25 mm) ratcheting wrench, knockout punches, dies and draw studs for 1/2'' (13 mm), 3/4'' (19 mm), 1'' (25 mm), 1-1/4'' (32 mm), ...
View full detailsKLEIN TOOLS 1/2" Knockout Punch Set
Klein ToolsThis Punch Set can punch clean and accurate holes in electrical panels. The 1/2-Inch Knockout Punch 3-Piece set can cut up to 10-gauge mild steel. ...
View full detailsKLEIN TOOLS 3/4" Knockout Punch Set
Klein ToolsThis Punch Set can punch clean and accurate holes in electrical panels. The 3/4-Inch 3-piece set can punch up to 10-gauge mild steel. It can also c...
View full detailsKLEIN TOOLS 8 PC. Pin Punches Long Set
Klein ToolsProudly manufactured in Australia, this set of pin punches from Klein Tools is built for strength and reliability. Used for driving out and removin...
View full detailsKLEIN TOOLS 5 PC. Brass Punches Set
Klein ToolsKlein Tools' Brass Punches are designed for applications requiring a softer punch. Or more specifically, any situation where using a hardened punch...
View full details