All

LED light clamp.

LAGUNA LED Lamp Bracket.

Complete Banjo fits Revo 24|36 Hardware included. Tool-Rest sold separately.

Complete kit that raises the lathe about 3". Optional Wheel System will function with this addition as well as the 4 soft pads. The 3”Riser Blocks ...

The Comparator allows you to mount a template & visually following the design. Brackets are standard equipment on the Revo 18|36.

The Revo 18|36 & 24|36 is pre-drilled & tapped to accept the vacuum inverter & rotary adapter.  Vacuum chuck & compressor required....

12" Tool Rest for 18/36, 24/36 Revo Lathe.

Complete Banjo fits Revo 15|24 Hardware included.

The wheel system allows the lathe to be easily moved around the shop.

20" Steel Extension comes packed with Cast Iron swing banjo extension to raise tool-rest for outboard turning and assorted mounting hardware.It can...

LAGUNA Revo 12|16: 8" Tool Rest.

L-Shaped Bracket mounts on the back of the headstock in hi/low position.

Complete Banjo fits Revo 12|16 Hardware included. Tool-Rest sold separately.

The 20" Bed Extension allows users to extend the center-to-center capacity by 20 inches for a total of 36" turning length. Fits Laguna Revo 12/16 l...

10" Expansion Set comes with 10" Bed Extension, cast-iron swing banjo extension for tool rest, spindle adapter, and hardware.The extension can be m...

Protects the area around the head-stock & mounts onto the bracket. Swivels out of the way when not in use.

The 12″ Swing-Away Extension allows you to “Park” the tail-stock onto the Extension & then swivel it out of the way when not in use. It also wo...

20" Steel Extension comes packed with cast-iron riser block to raise the Tailstock as well as Tool-Rest extender. The 20" Extension can mount in 5 ...

One single Cast Iron Leg to use in conjunction with the optional Steel Bed extension, Includes 2 X additional Soft Pads.

58" Steel bed allows you to bring the distance between Centers to 94", use in conjunction with Single Cast Leg.

Complete Deluxe Wheel System with Dual gas struts. Lathe sits on all 4 soft pads when in working mode. 4 Swiveling Casters provides easy maneuverab...

Never has a Midi Lathe been supported this well. Adjustable from 39"– 45" at spindle center & featuring ergonomic multi-tool shelving. Net Weig...

FOR MODELS WITHOUT DRO.

Designed for use with F1, F2, & F3 Table Saws. Square profile.

Fusion F1 Standard Throat Plate.

Easy-Install mobility kit for Fusion F1 Table Saw.

Wheel system fits JX 12" & 16" Jointers / PX 16", 20" & 22" Planers.

Fits Laguna JX|6 QuadTec: I & JX|8 QuadTec: I Jointer.The jointer conversion kit allows a user to change the voltage on the JX:6 & JX:8 Qua...

Jointer/Planer Knife For ShearTec II Cutterhead. 10 Pack of ShearTec II Knives.

Electrostatic Filter for Laguna Air Filtration Unit.

Fits Supermax Air Filtration Unit.

5 pack of plastic bags. 28 gal.

This set retro-fits most early Laguna Bandsaws as well as other European-made bandsaws including most Felder, Mini-Max, Bridgewood, and Agazzani sa...

Replaces ceramic guide channels with channels that utilize a phenolic rod. The wearable rod fully encompasses smaller blades to offer exceptional s...

Cool Block Kit for LT14SE-LT16 & LT14 3000 - LT18 3000. Replaces ceramic guide channels with channels that utilize a phenolic rod. The wearable...

Ceramic Round Fits 14|12, 3000, HD.

Ceramic Rectangular side piece for LT14, LT16, 14|12, 14|BX, 18|BX.

Fits 18 HD & LT 24X17. SPACE AGE ceramic guide block as both side and thrust support. This enables the ceramic piece to gently touch the side o...

Round Disc - 2 Pieces. Rectangular Piece -  8 Pieces. Fits The Following Band Saws: 14/12, 14BX, 18BX, 14SUV, 14-3000, 16-3000, 18-3000, LT14, 14SE...

Replacement phenolic set (8 pc.) for Laguna mini guides. Contains 1x5mm short phenolic rod.

The Laguna Mini Guides are specifically designed  to provide exceptional support and control for small blades. Laguna Mini Guides are the perfect a...