Air Tools - Sanders

.4 hp, Straight-Line, 0-3,200 RPM, Rear Exhaust, 6 mm Collet. Lightweight Dyninger Air-Powered Abrasive Finishing Tool, for use with Spindle-M...

.4 hp, Straight-Line, 0-3,200 RPM, Rear Exhaust, 1/4" Collet. Lightweight Dyninger Air-Powered Abrasive Finishing Tool, for use with Spindle-M...

.7 hp, 0-3,100 RPM, Rear Exhaust, M14 x 2 Spindle Thread. .7 hp. Ideal for use with optional 6" to 8" wet buffing accessories. M14 x 2...

.7 hp, 0-2,000 RPM, Rear Exhaust, M14 x 2 Spindle Thread. .7 hp. Ideal for use with optional 6" to 8" wet buffing accessories. M14 x 2 Male T...

.7 hp, 0-3,100 RPM, Rear Exhaust, M14 x 2 Spindle Thread. .7 hp. Ideal for use with optional 6" to 8" wet buffing accessories. M14 x 2 Male T...

.7 hp, 2,000 RPM, Rear Exhaust, M14 x 2 Spindle Thread. .7 hp. Ideal for use with optional 6" to 8" wet buffing accessories. M14 x 2 Male Thr...

 .7 hp, 500 - 3,600 RPM, Rear Exhaust, 5/8"-11 Spindle Thread. Variable Speed Wet Polisher delivers efficient wet polishing on stone, engineer...

.7 hp, 0-2,000 RPM, 5/8"-11 Spindle Thread, Rear Exhaust. Deluxe Model runs 5" (127 mm), 6" (152 mm), or 8" (203 mm) diameter polishing pads. ...

.7 hp, 0-2,000 RPM, Rear Exhaust, 5/8"-11 Spindle Thread. Basic Model runs 5" (127 mm), 6" (152 mm), or 8" (203 mm) diameter polishing pads. P...

Rear Exhaust, For 1/4"-20 Female Thread Type Pad. Very low vibration reduces hand and arm fatigue providing ultimate results to sensitive work...

.4 hp, 12,000 RPM, Geared, 1/8" (3 mm) Dia. Orbit, Rear Exhaust, for 1/4"-20 Female Pad. Ideal for use on gelcoat and clearcoat paint systems,...

.4 hp, 12,000 RPM, Geared, 1/8" (3 mm) Dia. Orbit, Front Exhaust, for Locking-Type Pad. Ideal for use on gelcoat and clearcoat paint systems, ...

.4 hp, 12,000 RPM, Geared, 1/8" (3 mm) Dia. Orbit, Front Exhaust, for 1/4"-20 Female Pad. Ideal for use on gelcoat and clearcoat paint systems...

.4 hp, 15,000 RPM, Geared, 1/8" (3 mm) Dia. Orbit, Front Exhaust, for 1/4"-20 Female Pad. Ideal for use on gelcoat and clearcoat paint systems...

.4 hp, 12,000 RPM, Geared, 1/8" (3 mm) Dia. Orbit, Rear Exhaust, for Locking-Type Pad. Ideal for use on gelcoat and clearcoat paint systems, p...

8000 RPM, .4 hp Right Angle, Front Exhaust. Ideal for sanding and polishing using 1-1/4" (32 mm) diameter sanding discs For use on gelocat an...

.12 hp, 7 Degree Offset, 15,000 RPM, 1/32" (1 mm) Dia. Orbit, Rear Exhaust. Ideal for getting into restricted areas such as corners and door j...

.12 hp, 7 Degree Offset, 15,000 RPM, 1/32" (1 mm) Dia. Orbit, Rear Exhaust. Ideal for getting into restricted areas such as corners and door j...

.12 hp, 7 Degree Offset, 13,000 RPM, 1/32" (1 mm) Dia. Orbit, Rear Exhaust. Excellent for fabricating solid surface coved backsplashes; ideal ...

.12 hp, 7 Degree Offset, 13,000 RPM, 1/32" (1 mm) Dia. Orbit, Rear Exhaust. Excellent for fabricating solid surface coved backsplashes; ideal ...

.12 hp, 7 Degree Offset, 15,000 RPM, 1/32" (1 mm) Dia. Orbit, Rear Exhaust. Tool includes 57932 Offset Sanding Arm (with 57938 Soft Platen Pad...

.12 hp, 7 Degree Offset, 13,000 RPM, 1/32" (1 mm) Dia. Orbit. Includes 57900 tool with hook-face and PSA (adhesive backed) pads, 94407 Flow-Co...

.12 hp, 7 Degree Offset, 13,000 RPM, 1/32" (1 mm) Dia. Orbit, Rear Exhaust. 57906 Dynafine comes mounted with 57956 Raised Panel Pad, which of...

.12 hp, 7 Degree Offset, 13,000 RPM, 1/32" (1 mm) Dia. Orbit, Rear Exhaust. Detail sander includes triangular and tear-drop hook-face pads; al...

0.4 hp (298 W) , 7 Degree Offset, 15,000 RPM, 1/32" (1 mm) Dia. Orbit, Extended Rear Exhaust. Dynafine Scraper includes 30 mm wide scraper bla...

.3 hp, 2,400 SPM, 3/8" (10 mm) SL, Rear Exhaust. 2,400 strokes per minute at 90 PSIG (6.2 Bar). 3/8" (10 mm) stroke length. Includes 2-3/4" w...

.3 hp, 2,400 SPM, 3/8" (10 mm) SL, Rear Exhaust. 2,400 strokes per minute at 90 PSIG (6.2 Bar). 3/8" (10 mm) stroke length. Quality construct...

.3 hp, 2,400 SPM, 3/8" (10 mm) Stroke Length, Rear Exhaust. 2,400 strokes per minute at 90 PSIG (6.2 Bar). 3/8" (10 mm) stroke length. Has 1"...

.3 hp, 2,400 SPM, 3/8" (10 mm) SL, Rear Exhaust. 2,400 strokes per minute at 90 PSIG (6.2 Bar). 3/8" (10 mm) stroke length. Ready for connect...

1.3 hp, 3,500 RPM, Rotational Exhaust, for 3" W x 24" L (76 mm x 610 mm) Belts. Ideal for surface leveling, graining and finishing. Heavy-duty...

.4 hp, 7 Degree Offset, 3,200 RPM, Rear Exhaust, 3-1/4" (82 mm) W x 7" (178 mm) L Pneumatic Wheel. Rolling Pin Sander. Air-Powered Abrasive Fi...

.4 hp, 7 Degree Offset Handle, Gearless, Front Exhaust, 1/2" wide x 12" length belts. Sand and deburr in tight spots Lightweight, ergonomic a...

.4 hp, 7 Degree Offset, 25,000 RPM, Rear Exhaust, for 1/8"-1/2" W x 13" L (3-13 mm x 330 mm) Belts. Ideal for strap polishing and working in n...

.4 hp, 7 Degree Offset, 25,000 RPM, Rear Exhaust, for 1/8"-1/2" W x 12" L (3-13 mm x 305 mm) Belts. Ideal for strap polishing and working in n...

.4 hp, 25,000 RPM. Ideal for strap polishing and working in narrow openings. Tool includes 15026 Contact Arm for 1/2" wide x 12" long abrasive...

.4 hp, 7 Degree Offset Handle, Gearless, 1/2" wide x 12" length belts. ldeal for strap polishing and working in narrow openings. Sand and debu...

Sand and deburr in tight spots Lightweight, ergonomic and maneuverable Accepts coated and abrasive impregnated non-woven nylon belts Swing awa...

1 hp, Right Angle, 2,800 RPM, Rear Exhaust, 3/4" (19 mm) Dia. Arbor. Dynisher Versatility Kit achieves superior in-line finishes on metal. In...

1 hp, Right Angle, 2,800 RPM, Rear Exhaust, 3/4" (19 mm) Dia. Arbor. Dynisher Air-Powered Abrasive Finishing Tool achieves superior in-line fi...

.7 hp, 7 Degree Offset, 3,400 RPM, Rear Exhaust, 3/4" (19 mm) Dia. Arbor, Metric. Dynisher Versatility Kit achieves superior in-line finishes ...

.7 hp, 7 Degree Offset, 3,400 RPM, Rear Exhaust, 3/4" (19 mm) Dia. Arbor. Dynisher Versatility Kit achieves superior in-line finishes on metal...

.7 hp, 7 Degree Offset, 4,500 RPM, 5/8"-11 Thread, Extended Shroud.   SPECIFICATIONS Arbor Hole 3/4" (19 mm) Power (hp) 0.7 Max. RPM 3,400 ...

.7 hp, 7 Degree Offset, 3,400 RPM, Rear Exhaust, 3/4" (19 mm) Dia. Arbor, Metric. Dynisher Air-Powered Abrasive Finishing Tool achieves superi...

.7 hp, 7 Degree Offset, 3,400 RPM, Rear Exhaust, 3/4" (19 mm) Dia. Arbor. Dynisher Air-Powered Abrasive Finishing Tool achieves superior in-li...

2.4 hp, Straight-Line, 13,000 RPM, Rear Exhaust, for 2" W x 45" L (51 mm x 1143 mm) Belts. Polish, grind contours and flats. Surface condition...

2.4 hp, Straight-Line, 13,000 RPM, Rear Exhaust, for 2" W x 34" L (51 mm x 864 mm) Belts. Polish, grind contours and flats. Surface conditions...

1.2 hp, Straight-Line, 13,000 RPM, Rear Exhaust, for 2" W x 34" L (51 mm x 864 mm) Belts. Polish, grind contours and flats. Surface conditions...

.7 hp, 7 Degree Offset, 20,000 RPM, Rear Exhaust, for 1" x 18" L (25 mm x 457 mm) Belts. Powerful direct-drive air motor with adjustable speed...