AEMC 2121.71 Lightmeter Datalogger Model 1110
Model Number: AEM212171
The Lightmeter Model 1110 is a portable, easy-to-use instrument which features optical sensors that are designed to match the response of the human eye, making them ideal instruments for workspace analysis and planning. The main advantage of the logger is its ability to perform a variety of recording tasks with easy and intuitive setup from a computer using supplied DataView® software. The ergonomically designed case, large display and intuitive function selection make this instrument the right choice for any application.
The Lightmeter Model 1110 is designed for simple one-hand operation. It provides selectable lux or footcandle units for display and features a blue luminescent backlit display, MIN/MAX/AVG and HOLD functions.
| Channel | One with LCD display and Backlight | |
| Input | Detachable silicon (Si) sensor Class C Lightmeter per NF C 42-710 | |
| Accuracy | ± 3 % of Reading on incandescent sources (default mode) ± 6 % of Reading on LEDs (3000 to 6000) K ± 9 % of Reading on fluorescent sources |
|
| Accuracy with compensation | LED mode: ±4 % of R (at 4000 K) Fluorescent mode: ±4 % of R (type F11, 4000 K) |
|
| Resolution | 0.1 lx: (0.1 to 999.9) lx 1 lx: (1000 to 9.999) lx 10 lx: (10.00 to 99.99) klx 100 lx beyond: (100.0 to 200.0) klx |
0.01 fc: (0.01 to 99.99) fc 0.1 fc: (100.0 to 999.9) fc 1 fc: (1.000 to 9.999) kfc 10 fc beyond (10.00 to 18.58) kfc |
| Recording | Manual start/stop on the product Short press for MEM: spot recording/long press for REC at the define default rate Programed recording: start date, recording interval, and end date defined using DataView® software |
|
| Other functions | MIN-AVG-MAX-HOLD | |
| Sampling Rate | Programmable from 1s, 2s, 5s, 10s, 20s, 30s, 2min, 5min, 10min, 15min, 30min, and 1hr | |
| MAP mode | The MAP mode can be used to map the lighting on a surface of a room. In this case the measurements are saved in the same file | |
| Memory | 1,000,000 measurements on each channel (4 MB). Recorded data is stored in non-volatile memory and will be retained even if battery is low or removed. | |
| Communication | USB 2.0 and Bluetooth | |
| Power Source | (3) 1.5 V AA(LR6) alkaline batteries or USB port (micro-USB adaptor offered as an accessory) | |
| Battery Life | 500 h, 3 y with 15 min intervals | |
| Dimensions: Case Sensor |
(5.9 x 2.84 x 1.28) in (150 x 72 x 32) mm (2.64 x 2.52 x 1.38) in (67 x 64 x 35) mm |
|
| Weight (with battery) | 12.2 oz (345 g) with batteries | |
| Case | Polycarbonate | |
| Operating Temperature | (14 to 140) ° F (-10 to 60) °C | |
| Storage Temperature | (-4 to 140) ° F (-20 to 60) °C | |
| Relative Humidity | Up to 90 % RH | |
| Ingress Protection (IP) | IP50 with USB connector closed and protective cap on the sensor | |
| EMC | EN 61326-1 | |
| Safety Compliance | IEC 61010-1 | |
| Warranty | 2 years | |
