AEMC 2115.84 AC Current Probe Model MN291
SKU 2115.84
Model Number: AEM211584
Original price
$237.50
-
Original price
$237.50
Original price
$237.50
$237.50
-
$237.50
Current price
$237.50
The MN291 is a general purpose AC current probe with voltage output. It is designed for use with DMMs or with measuring instruments with voltage inputs. These probes permit the measurement or recording of current with instruments without current ranges. The voltage output is proportional to the current measured (through the jaws). The MN291 offers a VDC output of 100mVDC per AAC and may be used with loggers or other instruments with DC voltage input. The MN291 has integral 5 ft (1.5m) leads terminated by shrouded banana plugs.
| Maximum Conductor Size | 0.78" (20mm), bus bar 20x5mm |
| Current Range | 200Arms AC |
| Measurement Range | 0.5 to 240A |
| Output | 5ft (1.5m) lead safety 4mm banana plug |
| Transformation Ratio | N/A |
| Output Signal | 100 mVDC/AAC (20VDC @ 200AAC) |
| Accuracy 50/60Hz | 2% @ 200A |
| Frequency Range | 40Hz to 10KHz (-3dB) |
| Phase Shift At 50Hz | N/A |
| Open Secondary Voltage | N/A |
| Load Impedance | 1MΩ |
| Overload | 240A for 10 min ON, 30 min OFF |
| Dimensions (H x W x D) | 5.47 x 2.00 x 1.18” (139 x 51 x 30mm) |
| Weight | 6.3 oz (180g) |
| Operating Temperature | 14° to +131°F (-10° to +55°C) |
| Storage Temperature | -40° to +158°F ( -40° to +70 °C) |
| Operating Humidity | 90% RH |
| Pollution Degree | 2 |
| Ingress Protection (Ip) | IP40 |
| EMC | EN 61326-1 |
| Safety Compliance |
EN/IEC 61010-1 600V CAT III,
|
